In my ignorance, it isn't clear to me why this is a problem. If I connected all the camera bus pins to each camera and then powered them up and dow in an orderly fashion, what would keep them from operating independently of each other?
On Sunday, October 26, 2014 4:03:23 PM UTC-6, RobertCNelson wrote: > > On Sun, Oct 26, 2014 at 3:18 PM, Michael Lefsky <[email protected] > <javascript:>> wrote: > > I would like to attach multiple LI-5M03 to a single BB Xm and be able to > > access them sequentially with a pause between cameras of 1 sec or less. > I > > have seen similar queries on this group, but not one using the LI-5M03. > I > > have good reasons for picking the LI-5M03 (specifically its 2.2 um pixel > > size) and for wanting to connect multiple cameras to the camera port > (rather > > than using multiple USB cameras). > > > > The Raspberry Pi group had a series of discussions on this topic for the > RPi > > camera which indicated that connecting multiple cameras was not > possible, > > but then someone went and created the IVPort which could connect 4 > cameras. > > The IVPort didn't ever get the funding it needed to go to production, > but > > that's a different story. > > Seems like exactly the same story.. Same limitation.. Good Luck! > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
