Many thanks! Does the newer build have SGX modules or do I have to do:
sudo apt-get install ti-sgx-es8-modules-`uname -r` sudo depmod -a `uname -r` sudo update-initramfs -uk `uname -r` everytime I upgrade to a newer TI kernel or flash a newer jessie build? Op zondag 26 oktober 2014 23:28:36 UTC+1 schreef RobertCNelson: > > On Sun, Oct 26, 2014 at 5:20 PM, Husam Ceceli <[email protected] > <javascript:>> wrote: > > I just flashed the 2014-10-08 jessie snapshot as it comes with > pre-loaded > > SGX kernel modules and I wanted to try lxqt. > > But however my computer doesn't recognize the BBB (as a removable > device) > > when I connect it through USB. ( I installed all the drivers etc.) > > This problem only occurs with jessie I guess. Does it have to do with > the > > USB networking thing? > > I checked the dmesg log for a line containing 'rndis' but it didn't show > > any, so I guess I have to edit the kernel sources. (basically following > this > > tutorial --> http://elinux.org/BeagleBone_Usb_Networking) > > Well the "usb-flash" drive should be working out of the box. so > something must have happend when you tried to flash the eMMC.. you did > let it flash the eMMC right? > > Last week i posted a newer build (2014-10-22): > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Jessie_Snapshot > > But i forgot udchp, so usb-networking doesn't work, until your run: > > sudo apt-get update > sudo apt-get install udhcpd > > That's fixed for whenever i do the next snapshot: > > > https://github.com/RobertCNelson/omap-image-builder/commit/ba53d25ea8bb3313786b896ff0b049f055989245 > > > > How am i supposed to be editing the sources if there isn't anything in > > /usr/src/ ? > > I made it dirt easy: > > git clone https://github.com/beagleboard/linux > git checkout `uname -r` -b tmp > > config is "bb.org_defconfig" > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
