On Sun, Oct 26, 2014 at 9:01 AM, vinge.ven <[email protected]> wrote: > I am try to build a xenomai kernel following this url > https://github.com/cdsteinkuehler/linux-dev , > RCN Kernels with Xenomai patches added. > > I get the zImage and dtb modules file, and I copy it to a SD card with > ubuntu 12.04 rootfs. > and boot form the sdcard. I got this error: > -------------------------------------------- > gpio: pin 55 (gpio 55) value is 1 > invalid extent block > mmc_send_cmd : timeout: No status update > ** File not found /boot/zImage ** > Booting from internal eMMC... > gpio: pin 56 (gpio 56) value is 1 > ** File not found /boot/dtbs/am335x-boneblack.dtb ** > Bad Linux ARM zImage magic! > ------------------------------------------------ > it back to uboot command line . > > This sdcard boot fine with a normal bbblack kernel zImage, > The precompiled kernel(with xenomai) zImage provide by machinekit on url > http://static.mah.priv.at/public/beaglebone/starterkit/ > which is name with bone53 is also boot correctly. > > I try to ext4load mmc 0:2 0x80008000 /boot/zImage, and got the error > "invalid extent block". > > I can't understand why it seem to not find my zImage file , > ext4ls show the file is just there and the size is correct. > I use linaro 4.7 hf
It's probally looking under the /boot/ directory on the "fat" partition.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
