From: <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Monday, October 27, 2014 at 12:51 AM To: "[email protected]" <[email protected]> Subject: [beagleboard] is the Altium sch and pcb correct? Somebody tried to make BBB using it?
> We are very happy to use BBB in our still small project, but it is not enough > to us, such as the second channel Etnernet. > We would like to use the scheme BBB for our project, and We would like to > clarify whether the Altium scheme and PCB correct? Somebody tried to make BBB > using it? The conversion was verified as follows. The schematic and PCB were imported to Altium and then the schematic and PCB were synched. Any anomalies (there were many) were resolved and the part footprints were adjusted for PCB manufacturability. Gerber files where generated and then compared to the gerber files from BeagleBoard. The Gerber files are almost a perfect match on each and every layer. As Gerald say, Altium project is supplied as is and no guarantees are provided. It is up to you to do your homework as I described above. Regards, John > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
