NOTE: I apologize for the double post. I just realized that I may have set
Categories wrong. First time mistake.
Installed Ubuntu (+ desktop) on BBB
root@ubuntu-armhf:~# uname -a
Linux ubuntu-armhf 3.8.13-bone30 #1 SMP Thu Nov 14 11:19:20 UTC 2013 armv7l
armv7l armv7l GNU/Linux
Installed Linux Driver for Netis WF2190 (my wireless dongle connected to
the BBB)
I am able to connect to my wireless network. Now I am trying to share this
connection with the BBB ethernet port. I succeeded with a PC + Ubuntu, so I
am now trying to do the same using the BeagleBone.
I have tried the usual way using the GUI, Edit Connection and select
"Shared to other computers". At this stage I'd be expecting the eth0 port
to acquire the 10.42.0.1 ... it never does on the BeagleBone Black.
wlan0 is well connected to the Internet, eth0 never gets an IP.
root@ubuntu-armhf:~# ifconfig
eth0 Link encap:Ethernet HWaddr 78:a5:04:df:d9:03
inet6 addr: fe80::7aa5:4ff:fedf:d903/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:309 errors:0 dropped:0 overruns:0 frame:0
TX packets:418 errors:1 dropped:3 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:64045 (64.0 KB) TX bytes:86009 (86.0 KB)
Interrupt:56
eth0:avahi Link encap:Ethernet HWaddr 78:a5:04:df:d9:03
inet addr:169.254.7.190 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:56
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4586 (4.5 KB) TX bytes:4586 (4.5 KB)
wlan0 Link encap:Ethernet HWaddr 04:8d:38:11:21:07
inet addr:192.168.2.109 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::68d:38ff:fe11:2107/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4774 errors:0 dropped:22 overruns:0 frame:0
TX packets:875 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:651142 (651.1 KB) TX bytes:140149 (140.1 KB)
I have tried
root@ubuntu-armhf:~# ifdown eth0 <==== OK
root@ubuntu-armhf:~# ifup eth0 <==== HANGS FOREVER
I have a ethernet cable plugged from BBB to a PC with Debian.
Ethernet port on the Debian PC is on DHCP, is should acquire an IP
10.42.0.x .
Again this setup worked with 2 PCs, Only trying to do it with BBB.
root@ubuntu-armhf:~# lsmod
Module Size Used by
iptable_filter 1504 0
ip_tables 11013 1 iptable_filter
x_tables 16848 2 iptable_filter,ip_tables
bnep 10299 2
rfcomm 30945 0
bluetooth 190961 10 bnep,rfcomm
rfkill 18295 3 bluetooth
8812au 1151560 0
Saisissez le code ici...
Also I don't understand what is this eth0:avahi, it seems to show up at
times.
Any suggestions / tips to troubleshoot/fix this?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
