'hf' signifies hardware floating point, which the Beagle has. On Sunday, November 2, 2014 2:04:59 PM UTC-8, [email protected] wrote: > > Hi, > > I've been trying to setup my cross-compile tool chain for programming on > the BBB through a Linux Mint box with Eclipse running in VMPlayer. So far > I've been able to configure almost all the needed components properly to > cross-compile and deploy using g++-4.8-arm-linux-gnueabihf (for some reason > the non 'hf' version doesn't work-- I admit I am still trying to > differentiate between the various flavors of arm out there that are > represented by the compilers). > > However, I can't seem to quite get/find a cross-complied version of the > SDL lib (I know SDL2) doesn't work on the BBB. > > I found this <http://how-to-build-for-arm.wikispaces.com/sdl> page with > some instructions, but it doesn't seem to work quite right for me either. > Further, I know there is a version of SDL 1.2 that can be apt-get from the > BBB itself-- but of course this doesn't help when wanting to try to > cross-compile rather than compile directly on the BBB. > > Lastly, though I've been able to find some rather easy/straight forward > instructions > for the Raspberry Pi > <http://www.raspberrypi.org/forums/viewtopic.php?f=67&t=39667>, I can't > seem to find anything comparable for the Debian version of BB. > > Does anyone happen to have any recommendations or suggestions? > > Thanks- >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
