Hello! I downloaded this file via Bittorrent and direct: Debian (BeagleBone, BeagleBone Black - 2GB SD) 2014-05-14 <http://debian.beagleboard.org/images/bone-debian-7.5-2014-05-14-2gb.img.xz>
I use Win32 Disk Imager and generate the sd card. I put the card into the BBB, press USER button and Power up. All 4 LED are on. I release the button and from the LED is only 1 on and keep on. I made some teste with the DeviceTree and have to reflash the eMMC. Because the BBB doesn´t start. I connect the serial debug cable ... and see that he are not booting from sd card? When I check MD5 Hash at Win32 Disk Imager, I get another as on the website, where I download the image. Or is the website Hash for the .xzFile and not for the .img file? <\0><\0><30><\0><\r><\n> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)<\r><\n> reading args<\r><\n> spl_load_image_fat_os: error reading image args, err - -1<\r><\n> reading u-boot.img<\r><\n> reading u-boot.img<\r><\n> <\r><\n> <\r><\n> U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)<\r><\n> <\r><\n> I2C: ready<\r><\n> DRAM: 512 MiB<\r><\n> NAND: 0 MiB<\r><\n> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1<\r><\n> *** Warning - readenv() failed, using default environment<\r><\n> <\r><\n> Net: <ethaddr> not set. Validating first E-fuse MAC<\r><\n> Could not get PHY for cpsw: addr 0<\r><\n> cpsw, usb_ether<\r><\n> Hit any key to stop autoboot: 1 <\b><\b><\b> 0 <\r><\n> gpio: pin 53 (gpio 53) value is 1<\r><\n> mmc0 is current device<\r><\n> gpio: pin 54 (gpio 54) value is 1<\r><\n> SD/MMC found on device 0<\r><\n> reading uEnv.txt<\r><\n> 1672 bytes read in 5 ms (326.2 KiB/s)<\r><\n> gpio: pin 55 (gpio 55) value is 1<\r><\n> Loaded environment from uEnv.txt<\r><\n> Importing environment from mmc ...<\r><\n> Checking if uenvcmd is set ...<\r><\n> gpio: pin 56 (gpio 56) value is 1<\r><\n> Running uenvcmd ...<\r><\n> reading zImage<\r><\n> 4103240 bytes read in 226 ms (17.3 MiB/s)<\r><\n> reading initrd.img<\r><\n> 2957458 bytes read in 165 ms (17.1 MiB/s)<\r><\n> reading /dtbs/am335x-boneblack.dtb<\r><\n> 25926 bytes read in 9 ms (2.7 MiB/s)<\r><\n> Kernel image @ 0x82000000 [ 0x000000 - 0x3e9c48 ]<\r><\n> ## Flattened Device Tree blob at 88000000<\r><\n> Booting using the fdt blob at 0x88000000<\r><\n> Using Device Tree in place at 88000000, end 88009545<\r><\n> <\r><\n> Starting kernel ...<\r><\n> <\r><\n> Uncompressing Linux... done, booting the kernel.<\r><\n> [ 0.378378] omap2_mbox_probe: platform not supported<\r><\n> [ 0.532918] tps65217-bl tps65217-bl: no platform data provided<\r><\n> [ 0.596810] bone-capemgr bone_capemgr.9: slot #0: No cape found<\r><\n> [ 0.633918] bone-capemgr bone_capemgr.9: slot #1: No cape found<\r><\n> [ 0.671026] bone-capemgr bone_capemgr.9: slot #2: No cape found<\r><\n> [ 0.708135] bone-capemgr bone_capemgr.9: slot #3: No cape found<\r><\n> [ 0.722803] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)<\r><\n> [ 0.732415] bone-capemgr bone_capemgr.9: slot #6: Failed verification<\r><\n> [ 0.739161] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)<\r><\n> [ 0.756685] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed<\r><\n> [ 0.819747] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8<\r><\n> [ 0.831432] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22<\r><\n> [ 0.838714] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single<\r><\n> [ 1.044647] Unhandled fault: external abort on non-linefetch (0x1008) at 0xe089c000<\r><\n> [ 1.052776] Internal error: : 1008 [#1] SMP THUMB2<\r><\n> [ 1.057847] Modules linked in:<\r><\n> [ 1.061092] CPU: 0 Not tainted (3.8.13-bone50 #1)<\r><\n> [ 1.066442] PC is at cpsw_probe+0x348/0x960<\r><\n> [ 1.070871] LR is at ioremap_page_range+0x95/0xf8<\r><\n> [ 1.075841] pc : [<c0324484>] lr : [<c0254815>] psr: a0000033<\r><\n> [ 1.075841] sp : df071e18 ip : 00000000 fp : df0d3400<\r><\n> [ 1.087964] r10: c081de48 r9 : de5fb800 r8 : de5fbd90<\r><\n> [ 1.093474] r7 : de5fb800 r6 : de5fbd40 r5 : 00000000 r4 : e089c000<\r><\n> [ 1.100361] r3 : 80000000 r2 : 00000000 r1 : e089d000 r0 : e089c000<\r><\n> [ 1.107245] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment kernel<\r><\n> [ 1.115132] Control: 50c5387d Table: 9e2a4019 DAC: 00000015<\r><\n> [ 1.121200] Process swapper/0 (pid: 1, stack limit = 0xdf070240)<\r><\n> [ 1.127536] Stack: (0xdf071e18 to 0xdf072000)<\r><\n> [ 1.132146] 1e00: 00000000 c00b5629<\r><\n> [ 1.140774] 1e20: c086b9b8 c086b9b8 de5fbd40 de5fba98 df0d3410 de5fe688 00000000 df071e90<\r><\n> [ 1.149408] 1e40: df071e90 c00fdd53 22222222 22222222 00000000 c086b9b8 de5fe688 de2927c0<\r><\n> [ 1.158038] 1e60: de5fe688 c00fdc8f de5fe688 00000000 df071e90 de5fe708 df0d5d48 c00fe507<\r><\n> [ 1.166673] 1e80: df0494b8 c00492af 00000000 df0d3444 00000020 00000008 df0d3410 c09189ec<\r><\n> [ 1.175306] 1ea0: df0d3410 c088aa58 00000000 c0800925 00000100 c081de48 00000000 c02c6e19<\r><\n> [ 1.183931] 1ec0: c02c6e09 c02c62bb 00000000 df0d3410 c088aa58 df0d3444 00000000 c02c641b<\r><\n> [ 1.192551] 1ee0: c088aa58 c02c63d1 00000000 c02c53ef df049478 df0ce600 c088aa58 c087fe90<\r><\n> [ 1.201183] 1f00: de2927c0 c02c5daf c072dc7c c088aa58 c088aa58 df070000 c08ab580 00000000<\r><\n> [ 1.209824] 1f20: c0800925 c02c671d 00000000 c080b080 df070000 c08ab580 00000000 c0800925<\r><\n> [ 1.218455] 1f40: 00000100 c000867f 00000007 00000007 c0863b18 c080b07c c080b080 00000007<\r><\n> [ 1.229707] 1f60: c080b060 c08ab580 c07e51c9 c081de48 00000000 c07e56a3 00000007 00000007<\r><\n> [ 1.240924] 1f80: c07e51c9 c0d35fc0 00000000 c04c4e29 00000000 00000000 00000000 00000000<\r><\n> [ 1.252127] 1fa0: 00000000 c04c4e2f 00000000 c000c8fd 00000000 00000000 00000000 00000000<\r><\n> [ 1.263357] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<\r><\n> [ 1.274601] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 b9bbeb1b f958e75d<\r><\n> [ 1.285879] [<c0324484>] (cpsw_probe+0x348/0x960) from [<c02c6e19>] (platform_drv_probe+0x11/0x14)<\r><\n> [ 1.298050] [<c02c6e19>] (platform_drv_probe+0x11/0x14) from [<c02c62bb>] (driver_probe_device+0x53/0x168)<\r><\n> [ 1.310946] [<c02c62bb>] (driver_probe_device+0x53/0x168) from [<c02c641b>] (__driver_attach+0x4b/0x4c)<\r><\n> [ 1.323603] [<c02c641b>] (__driver_attach+0x4b/0x4c) from [<c02c53ef>] (bus_for_each_dev+0x27/0x48)<\r><\n> [ 1.335951] [<c02c53ef>] (bus_for_each_dev+0x27/0x48) from [<c02c5daf>] (bus_add_driver+0xe3/0x168)<\r><\n> [ 1.348285] [<c02c5daf>] (bus_add_driver+0xe3/0x168) from [<c02c671d>] (driver_register+0x3d/0xc4)<\r><\n> [ 1.360523] [<c02c671d>] (driver_register+0x3d/0xc4) from [<c000867f>] (do_one_initcall+0x1f/0xf4)<\r><\n> [ 1.372750] [<c000867f>] (do_one_initcall+0x1f/0xf4) from [<c07e56a3>] (kernel_init_freeable+0xc3/0x158)<\r><\n> [ 1.385507] [<c07e56a3>] (kernel_init_freeable+0xc3/0x158) from [<c04c4e2f>] (kernel_init+0x7/0x98)<\r><\n> [ 1.397810] [<c04c4e2f>] (kernel_init+0x7/0x98) from [<c000c8fd>] (ret_from_fork+0x11/0x34)<\r><\n> [ 1.409418] Code: f000 81d2 f8c7 05c0 (6803) f44f <\r><\n> [ 1.417277] ---[ end trace 7d07e23141a759b4 ]---<\r><\n> [ 1.425085] Kernel panic - not syncing: Attempted to kill init! exitcod -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
