Robert Nelson <[email protected]> [14-11-04 19:20]: > On Nov 4, 2014 9:53 AM, <[email protected]> wrote: > > > > Hi, > > > > ist possible, to compile (NOT crosscompile!) stuff for this board: > > http://www.acmesystems.it/arietta > > > > CPU is an Atmel AT91SAM9G25 SoC (ARM9 @ 400Mhz)... > > (no FPU) > > > > Thank you very much for any help in advance! > > Then run debian wheezy 'armel', it's built for armv4t so it'll run on both > devices. > > > > Best regards, > > mcc > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout.
Hi Robert, thank for email! :) On my Beaglebone Black I am using Gentoo (hf), which I dont want to swap with debian or any other distribution. Is it possible to install a hardfloat and a softfloat compiler simultanously on my BBB. And is my assumption correct, that nothing else should be changed with exception of the gcc? Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
