My understanding is 'echo' for ssty is just to turn ON/OFF echo of input characters i.e. if '-echo' flag is used it would just prevent the input characters I send via BBB from appearing on my screen. My problem is with the data that BBB receives. Everytime BBB receives a byte, it transmits back the same byte.
I shall keep looking. On Monday, November 3, 2014 6:55:09 PM UTC-5, [email protected] wrote: > > Hello All, > > I am working with the stock Debian distribution of Beagle Bone Black (rev > C). > I run the following command to enable UART 1 : > > echo BB-UART1 > /sys/devices/bone_capemgr.*/slots > > and it works fine i.e. I am able to see ttyO1 listed in /dev and also able > to transmit commands to a remote terminal. > > However, when I send anything from the terminal to BBB, I observe that the > same data is echoed by BBB back to the terminal! How do I disable this? > > I went through the stty commands but nothing relevant there. > > Thanks! > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
