I've been using my BBB RevC just fine with it connected to my computer's USB Host port. I finally got the bits I needed for standalone -- HDMI cable, USB hub, power supply, etc.
If I plug the power in to the otherwise unconnected BBB, the power light lights, the four status lights light, then all five shut off. If I plug the USB from the PC in to the otherwise unconnected BBB, it boots right up, normally. If I then plug in the power, there is no change. If I then unplug the USB, no change. It runs on the power dongle! If I plug the USB from the PC in to the otherwise unconnected BBB, it boots right up, normally. If I then plug in the power, there is no change. If I then unplug the power, the BBB shuts down, even though the USB is still connected. The power is from a wall wart -- 5v nominal, 5.3v measured, 1 amp nominal. There is no SD card installed. I bought the BBB direct from Atoms Ind. a couple weeks ago, and have not (to my knowledge) changed anything. Any suggestions? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
