reflash with a new image
On 11/10/2014 10:27 AM, 范大伟 wrote: > Hello everyone, > At first I'd like to change the IP address of my BBB thus connect > multiple BBBs with my PC. According to > https://groups.google.com/forum/#!topic/beagleboard/mn1VKZBV4sY ,I > edited /etc/udhcpd.conf changing IP from 192.168.7.1 to 192.168.8.1, > then changed usb0 ip to 192.168.8.2. There are not > /usr/bin/g-ether-load.sh and /etc/udev/rules.d/udhcpd.rules in my BBB. > > However, after reboot I can't connect the BBB anymore using > 192.168.7.2 or 192.168.8.2, but still have access to boot disk. Then I > delete all files on this disk, copy all files from another BBB's boot > disk to this disk.(A big mistake!!!) After this I cannot access boot > disk or connect it through USB. > > Now only LED0 is blinking, indicating that the CPU is not working. > What can I do now? Any suggestions are welcomed! > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
