> > *Aside from that, you can manually unload the driver module on the BBB > from mass storage to g_ether as a test but, that would be complicated > without a physical connection to the BBB.* >
That is manually unload the mass storage drivers, and then load g_ether. Since only one gadget driver at a time can be loaded. On Mon, Nov 10, 2014 at 2:53 PM, William Hermans <[email protected]> wrote: > You need to do a manual windows update afterwards . > > start button -> rightclick computer -> select properties ->bottom left > windows update ->top left check for updates. > > Then you should be presented with a driver to select for download / > install. It can take some time ( several minutes ) for windows / windows > update to do some "thinking". > > If your install is old, windows may be having issues. It is also possible > the the newest version of Debians' drivers may be unknown to windows. But > the latter case here is not very likely I think. > > Aside from that, you can manually unload the driver module on the BBB from > mass storage to g_ether as a test but, that would be complicated without a > physical connection to the BBB. > > You could hook it up via the ethernet port, to gain access to tinker > around, but the process is rather intricate, which I could go into but . . > . yeah I may have a console log of me doing that myself. BUt then again I > may not. > > > On Mon, Nov 10, 2014 at 2:43 PM, <[email protected]> wrote: > >> Uninstalled drivers and suggested... still nothing. >> >> Curious thing is that I don't get the "clunk" sound that I normally get >> when a USB device is plugged in and detected.The only time that I get such >> a sound is if I apply power with the boot switch depressed. That's when I >> get the "AM335x USB" device to show up, but it can't find a driver for it. >> >> Is there a chance that the board is bad? >> >> Thanks in advance for your help/advise. >> >> On Monday, November 10, 2014 1:28:43 PM UTC-7, William Hermans wrote: >>> >>> First of all, uninstall those drivers. Sysrestore, or whatever it takes. >>> Then after done, plus the beaglebone back in, and do a manual windows >>> update. The drivers should then be installed after you let MSUpdate do its >>> thing. >>> >>> If that does not work, then IDK, something is probably wrong with your >>> copy of windows. >>> >>> On Mon, Nov 10, 2014 at 6:37 AM, <[email protected]> wrote: >>> >>>> >>>> Bought a Beagle Bone Black. When I first plugged in (I'm using >>>> Win7-64) it does not recognize as a USB device. I have installed BONE_D64. >>>> >>>> Tried putting new image on SD card (Angstrom 09-04-2-13) and booting >>>> from that. When I do this it repeatedly(every 30-45 seconds) tries to >>>> attach to "AM335X USB" but cannot find a driver for it. >>>> >>>> From looking through the forums, believe that I should have Linux USB >>>> Gadget Network driver under Network Adapters, but this doesn't show up. >>>> >>>> After a day of frustration, I hooked to monitor to HDMI and the board >>>> is booting. >>>> >>>> I'm frustrated. What am I missing? >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
