Hi BeagleBoard group members. I have a Fireball V90 <http://probotix.com/FireBall_v90_cnc_router_kit/> (PBX RF breakout) that I purchased a couple of years ago. I built the kit, got it running with an old windows box and then got hired and let it sit. I made a stab at replacing the failing windows box with a beaglebone black and xylotex bbb_db25 cape <http://xylotex.netfirms.com/OSCommerce/catalog/product_info.php?products_id=47&osCsid=e1e85a6387be5edd351c3b6f0de33916>. Now, I'd like to interface the V90 and the xylotex bbb_db25 cape and was wondering if there was someone else who has used this setup and posted something on the web. So far my Google searches come up empty.
I have experience in 3d printing and electronics and am comfortable with Linux. I am also planning to take a CNC course at our local community college this spring since I am new to CNC. So, my question to the group is has anyone heard of driving this system with a Beaglebone black and xylotex bbb_db25 cape? If not, I would probably try to incorporate the information in the http://probotix.com/cnc_downloads emc2 config files into Linux_CNC. Can anyone give me some heads up on how to check the pins from the bbb_db25 cape for correct signals before I connect to the PBX RF breakout V90 control board? Thanks for any thoughts you guys might have. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
