I have successfully flashed a BBB previously, but now when I try to flash a second BBB of mine with any image at all it fails. When I power on the second BBB without holding the boot button the heartbeat comes on and all the LEDs light up occasionally. When I DO hold the boot button, in an attempt to flash the BBB, only the powerlight comes on.
If anyone has accomplished this a few times and thinks they could help, I would greatly appreciate it. NOTE: My second BBB no matter what doesn't show up on my network (the network lights do flash though). I am using the same image and SD card I used for the original one that is working. When I plug in a microHDMI the BBB gets to the login screen, but without the ability to flash, ssh or install keybaord drivers I can't log in... EDIT: OS: Debian 7.7 ARMHF (eMMC Flasher 10-29) SD Card: 2GB and 16GB Class10 SD FAT32 Active (Using SD -> MicroSD adapter) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
