Hi all, I have the exact same problem with BBB when the board is powered with a 5V 2A source, but no problem is the board is usb powered. I was wondering if the problem had been solved problem ?
Regards, Le jeudi 13 mars 2014 15:57:17 UTC+1, [email protected] a écrit : > > Hi, > > I have noticed that the beaglebone black starts up after a shutdown. > > I have a C++ program running in the bbb, the bbb is backed by an external > +5V battery pack. When the C++ program issues the following command to > start the shutdown procedure of the bbb. > > system("shutdown -h now"); >> >> exit(0); >> >> > This does shutdown the bbb completely sometimes, most times the bbb starts > up again, the power led turns off but then after a second or two lights up > again and then bbb starts up all over again (the output voltage from the > power bank does not switch OFF, it remains ON for some time). > > In my previous bbb systems I have not faced this problem. > > It is my belief that the output voltage from the power bank has a sudden > dip, this causes the bbb to detect a new power cycle. > > I am not sure though if I am correct... > > Could anyone enlighten me on this problem ??? > > I am sorry if the above problem sounds vague... > > thanks > a > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
