I want to transfer my kernel image to beaglebone black, and the guide
mentions that I should have already set up DHCP and tftp on the host
machine.
I have set up the TFTP using:
>sudo apt-get install tftpd-hpa tftp-hpa
>sudo vim /etc/default/tftpd-hpa
>TFTP_USERNAME="tftp"
>TFTP_DIRECTORY="your-ftp-root-directory"
>TFTP_ADDRESS="0.0.0.0:69"
>TFTP_OPTIONS="--secure"
>sudo service tftpd restart
Also I need a DHCP server on host so It can assign IP to BBBlack.
SO I followed:
>sudo apt-get install isc-dhcp-server
>sudo /etc/init.d/networking/restart
>nano -w /etc/dhcp/dhcpd.conf
>default-lease-time 600;
>max-lease-time 7200;
>option subnet-mask 255.255.255.0;
>option broadcast-address 192.168.1.255;
>option routers 192.168.1.254;
>option domain-name-servers 192.168.1.1, 192.168.1.2;
>option domain-name "mydomain.example";
>subnet 192.168.1.0 netmask 255.255.255.0 {
>range 192.168.1.10 192.168.1.100;
>range 192.168.1.150 192.168.1.200;
>} `
>ls /etc/default/isc-dhcp-server
>INTERFACES "eth0"
eth0 Link encap:Ethernet HWaddr 00:23:ae:15:85:ae
inet6 addr: fe80::223:aeff:fe15:85ae/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1462 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:279343 (279.3 KB)
Interrupt:16
/etc/network/interface
auto lo
iface lo inet loopback
#auto eth0
iface eth0 inet static
address 192.168.1.2
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
up service dhcp3-server restart
Yet. The DHCP is not getting setup.
Please suggest where I may be going wrong
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
