On Sat, Nov 15, 2014 at 1:11 AM, Jason Lange <[email protected]> wrote: > Hi Robert, > withThis worked for me: > > /etc/dnsmasq.conf > #disable DNS by setting port to 0 > port=0 > > interface=usb0 > dhcp-range=192.168.7.1,192.168.7.1 > #one address range > > > /etc/network/interfaces > > auto lo > iface lo inet loopback > > allow-hotplug eth0 > iface eth0 inet dhcp > > allow-hotplug usb0 > iface usb0 inet static > address 192.168.7.2 > netmask 255.255.255.0 > network 192.168.7.0 > gateway 192.168.7.1 > > > > I'm using your 2014/11/11 jessie image and after I did an apt-get > update/upgrade I lost the ability to connect with ssh. removing udhcpd and > adding the above configuration for dnsmasq restored my ability to connect > via ssh on both interfaces.
Thanks Jason! I've now merged this change too.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
