On Thu, Nov 20, 2014 at 9:16 PM, Doug Edey <[email protected]> wrote: > OK, I'm still unclear as to how my old dts for one wire: > > /* > * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > * published by the Free Software Foundation. > * > * Modified by Russell Senior from the weather cape's DTS file. > * Minor formatting by C W Rose. > */ > /dts-v1/; > /plugin/; > / { > compatible = "ti,beaglebone", "ti,beaglebone-black"; > part-number = "BB-W1"; > version = "00A0"; > exclusive-use = "P8.11"; > fragment@0 { > target = <&am33xx_pinmux>; > __overlay__ { > bb_w1_pins: pinmux_bb_w1_pins { > pinctrl-single,pins = < > 0x34 0x37 /* gpmc_ad13.gpio1_13, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE7 - > w1-gpio */ >>; > }; > }; > }; > fragment@1 { > target = <&ocp>; > __overlay__ { > onewire@0 { > status = "okay"; > compatible = "w1-gpio"; > pinctrl-names = "default"; > pinctrl-0 = <&bb_w1_pins>; > gpios = <&gpio2 13 0>; > }; > }; > }; > }; > > > Would convert to the new dtsi, is there any documentation on the dtsi?
First test this: http://pastebin.com/yDyaHKcS If it works, i'll factor it into the patchset.. make sudo make install Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
