Hi, everybody.
I'm trying to add NTC thermistor as hwmon in linux. First I was trying to
add hwmon manually, but I simple don't know how. Now I'm trying to create
device tree overlay.
First I build ntc_thermistor module out-of-tree.
# modinfo ntc_thermistor/ntc_thermistor.ko
filename: /root/ntc_thermistor/ntc_thermistor.ko
alias: platform:ntc-thermistor
license: GPL
author: MyungJoo Ham <...>
description: NTC Thermistor Driver
srcversion: DBAD01E8C409F3A3514FAD2
depends:
vermagic: 3.8.13-35-ARCH SMP mod_unload modversions ARMv7 p2v8
# lsmod
Module Size Used by
ntc_thermistor 4075 0
omap_rng 4599 0
autofs4 21976 2
My .dts overlay:
/dts-v1/;
/plugin/;
/ {
compatible = "ti,beaglebone", "ti,beaglebone-black";
/* identification */
part-number = "BB-NTC";
version = "00A0";
/* state the resources this cape uses */
exclusive-use =
/* the pin header uses */
"P9.39", /* AIN0 */
"P9.40", /* AIN1 */
"P9.37", /* AIN2 */
"P9.38", /* AIN3 */
"P9.33", /* AIN4 */
"P9.36", /* AIN5 */
"P9.35", /* AIN6 */
/* the hardware IP uses */
"tscadc";
fragment@0 {
target = <&ocp>;
__overlay__ {
/* avoid stupid warning */
#address-cells = <1>;
#size-cells = <1>;
tscadc {
compatible = "ti,ti-tscadc";
reg = <0x44e0d000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <16>;
ti,hwmods = "adc_tsc";
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
ntc@0 {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <0>;
pulldown-ohm = <12000>;
io-channels = <&tscadc 0>;
};
test_helper: helper {
compatible = "bone-iio-helper";
vsense-name = "AIN0", "AIN1", "AIN2", "AIN3", "AIN4", "AIN5", "AIN6",
"AIN7";
vsense-scale = <100 100 100 100 100 100 100
100>;
status = "okay";
};
};
};
};
It compiles fine, and I successfully added to capemgr
#dmesg
[ 102.513840] bone-capemgr bone_capemgr.9: part_number 'BB-NTC', version
'N/A'
[ 102.514030] bone-capemgr bone_capemgr.9: slot #10: generic override
[ 102.514081] bone-capemgr bone_capemgr.9: bone: Using override eeprom
data at slot 10
[ 102.514134] bone-capemgr bone_capemgr.9: slot #10: 'Override Board
Name,00A0,Override Manuf,BB-NTC'
[ 102.514409] bone-capemgr bone_capemgr.9: slot #10: Requesting part
number/version based 'BB-NTC-00A0.dtbo
[ 102.514463] bone-capemgr bone_capemgr.9: slot #10: Requesting firmware
'BB-NTC-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 102.521859] bone-capemgr bone_capemgr.9: slot #10: dtbo
'BB-NTC-00A0.dtbo' loaded; converting to live tree
[ 102.525143] bone-capemgr bone_capemgr.9: slot #10: #1 overlays
[ 102.551219] bone-iio-helper helper.16: ready
[ 102.551443] bone-capemgr bone_capemgr.9: slot #10: Applied #1 overlays.
I expect to see hwmon1 in /sys/class/hwmon/, but I see only hwmon0 from
am33xx internal temp sensor
I would really appreciate any help
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
