On Sun, Nov 23, 2014 at 9:55 AM, 'David Batzle' via BeagleBoard <[email protected]> wrote: > Which is why I was thinking maybe a bad flash to NAND had caused a problem. > The DRAM is definitely not working now. > > When x-loader goes to load u-boot.bin off of MMC, it passes a file name to a > function in fat.c. The function copies the filename into DRAM and then parses > the copy of the name. It never finds a name because the contents of DRAM are > zeros. If I modify the function so that the copy of the filename and the > contents read from the MMC card are both in SRAM, then I get a message of > loading u-boot.bin from MMC but then it locks up. > > My next step I am planning to modify x-loader so it can properly wipe the > NAND clean. I just didn't want to waste my time if a bad flash would not be a > possible cause.
Why in the world are you still evening using "x-loader"? everything useful has been re-merged back into mainline u-boot as the generic "SPL".. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
