On Mon, Nov 24, 2014 at 2:34 PM, Bremenpl <[email protected]> wrote: > This is the output on debug serial now: > > . > . > .Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > [ 0.338981] omap2_mbox_probe: platform not supported > [ 0.493971] tps65217-bl tps65217-bl: no platform data provided > [ 0.558187] bone-capemgr bone_capemgr.9: slot #0: No cape found > [ 0.595295] bone-capemgr bone_capemgr.9: slot #1: No cape found > [ 0.632402] bone-capemgr bone_capemgr.9: slot #2: No cape found > [ 0.669512] bone-capemgr bone_capemgr.9: slot #3: No cape found > [ 0.688174] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' > failed > [ 0.749856] pinctrl-single 44e10800.pinmux: pin 44e10854 already > requested by 44e10800.pinmux; cannot claim for gpio-leds.8 > [ 0.761544] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status > -22 > [ 0.768813] pinctrl-single 44e10800.pinmux: could not request pin 21 on > device pinctrl-single > Loading, please wait... > systemd-fsck[205]: rootfs: clean, 21581/111104 files, 122520/444160 blocks > systemd-fsck[290]: dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN > systemd-fsck[290]: /dev/mmcblk0p1: 138 files, 31622/49047 clusters > [ 6.507830] tilcdc 4830e000.fb: no encoders/connectors found > [ 6.513806] tilcdc 4830e000.fb: failed to initialize mode setting > > There is still no visual. It says: > ... tilcdc.. > Does that mean hes not using the driver for tfp410? > Also, could you please confirm either the I2C2 in the tree overlay is the > I2C2 on the header? I am still not certain.
Verfiy: https://github.com/derekmolloy/boneDeviceTree/tree/master/docs Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
