From: Jason Kridner <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Tuesday, December 2, 2014 at 2:56 PM To: "[email protected]" <[email protected]> Subject: Re: [beagleboard] LabVIEW on windows beagle board
> While it isn't possible to run LABview directly, you can create VIs that talk > to a BeagleBone Black using Botspeak: > http://botspeak.org/supported-platforms/beaglebone/ and > http://beagleboard.org/project/botspeak > > Some additional development has been on-going to move Botspeak to the PRUs > (see PRUSpeak). > > I've heard some other efforts have been done, but nothing I know to report. Labview Embedded has a C code generator which creates a C file for the project which is then compiled for ARM. I worked on this years ago and managed to get this working on a Beagleboard-xM. I even managed to get a graphical GUI working, but the quality wasn¹t very good. Regards, John > > Let us know if this helps. > > On Tue, Dec 2, 2014 at 5:37 PM, David Funk <[email protected]> wrote: >> I doubt if it will run. >> >> LabVIEW uses x86 code, BBB runs on an ARM. >> >> >> >> -david >> . >> >> On Tue, Dec 2, 2014 at 3:44 PM, Swain, Brendan Lee >> <[email protected]> wrote: >>> To whom it may concern, >>> I am a student at a university in Texas. We are trying to find a simple way >>> to run our LabVIEW programming for our flow loop that we want to be pretty >>> autonomous. I was wondering if the Beagle bone with windows would be capable >>> of running LabVIEW. >>> Thanks, >>> Brendan Swain >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
