Output from the serial debug console would be handy . . . On Wed, Dec 3, 2014 at 3:38 AM, sarath ak <[email protected]> wrote:
> your BBB OS will be corrupted . . . > > Reflash your eMMC to resolve the problem . . .. . > > > > > > On Thursday, November 21, 2013 4:42:24 AM UTC+5:30, Sean Nored wrote: >> >> So we're working on our senior design project - I won't bore you with the >> details, but we're using Beaglebone Black to communicate serially with a >> laser. >> >> On to our problem, we've been using them for a while and were working on >> the serial stuff, when it froze and we had to remove the power to restart >> it. When we plugged it back in, we got the starting beaglebone bar at the >> top of the screen...but it never fully turned on. When we reset it again, >> it would no longer display anything. >> >> When ever we apply power now, the 3 user LEDs come on and the power LED >> comes on...then it just sits there. No output on the monitor at all. Any >> suggestions on how to fix this? We are new to BeagleBoards, so anything at >> all would be greatly appreciated! >> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
