On Wed, Dec 10, 2014 at 8:16 AM, Nic Cyn <[email protected]> wrote: >>add the flag "--bbb-old-bootloader-in-emmc" > > OK, I have now tried that. The command line I used was > > ./setup_sdcard.sh --mmc /dev/sdb --dtb beaglebone > --bbb-old-bootloader-in-emmc > > the problem remains. I tested this several times and I did see (once) the > BBB appear as a USB drive on the remote PC. In that instance the BBB did > reboot successfully. However after rebooting and again plugging in the USB > cable, the error appeared, the BBB would not mount as a USB drive and the SD > card was rendered unbootable. > > I have found an error message reported by the remote Linux PC. This appears > to be output by the process which is trying to mount up the BBB as a drive > over USB: > > Error mounting /dev/sdb at /media/dtree/rootfs: Command-line `mount -t > "ext4" -o "uhelper=udisks2,nodev,nosuid" "/dev/sdb" "/media/dtree/rootfs"' > exited with non-zero exit status 32: mount: wrong fs type, bad option, bad > superblock on /dev/sdb, > missing codepage or helper program, or other error > In some cases useful info is found in syslog - try > dmesg | tail or so
Now that's really odd ^ BTW, i'm yanking the "usb media" in situations where there is only "one" partition.. (it works in some situations but i've been getting lots of other issues by email.) ./setup_sdcard.sh --mmc /dev/sdb --dtb beaglebone --beagleboard.org-production --bbb-old-bootloader-in-emmc The "--beagleboard.org-production" add's a default 100Mb fat partition.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
