On Fri, Dec 12, 2014 at 9:22 AM, Charles Steinkuehler <[email protected]> wrote: > On 12/12/2014 8:49 AM, Robert Nelson wrote: >> On Fri, Dec 12, 2014 at 7:53 AM, Charles Steinkuehler >> <[email protected]> wrote: >>> It looks like the default HDMI cape is claiming one more pin than it >>> actually needs. The mcasp0_axr1 pin (ball D13, or P9 pin 41.1) is being >>> claimed by the HDMI overlay: >>> >>> https://github.com/beagleboard/linux/blob/3.8.13-bone68/firmware/capes/cape-boneblack-hdmi-00A0.dts#L88 >>> >>> ...but isn't actually connected to the HDMI framer or anything other >>> than P9 (and the 'old' P9 pin 41, ball D14) according to the schematic. >>> >>> Is this a goof as I expect, or is there some reason an unused audio data >>> line actually needs to be claimed by the HDMI overlay? >> >> Looks like it should be: >> >> 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ >> >> http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=blob;f=arch/arm/boot/dts/am335x-boneblack.dts;h=a088b1a42b2ec2c80630175ffe997fcd6141e930;hb=refs/heads/ti-linux-3.14.y#l70 > > That looks much more reasonable. > > Do you want to fix this, or should I send in a patch? ;-)
If you want to just add it to your current: 3.8.13-xenomai-pbx branch https://github.com/cdsteinkuehler/linux-dev/commits/3.8.13-xenomai-pbx I'll pull that along with the two other changes this weekend. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
