On 12/16/14, 8:35 PM, "Peter Gregory" <[email protected]> wrote:
>You can turn off the cursor using environment variable >QT_QPA_EGLFS_HIDECURSOR=1 > >I haven't found the proper way to have the console and a EGLFS Qt >application on the LCD work at the same time. >I've found that debugging messages go to the main console while the Qt >application runs on the LCD >So, the LCD display flashes with debugging messages on the console. >I had to re-compile Qt 5.3 with -DQT_NO_DEBUG_OUTPUT >-DQT_NO_WARNING_OUTPUT to get it to stop spamming the main console. >If you figure out how to make it work right, that would be great. I think you just remove the console=tty0 from your mmcargs line in uEnv.txt file. That should remove the console output from your display, but will continue to display the console on the UART. Regards, John > >A great resource for Qt embedded options is here: >https://qt-project.org/doc/qt-5-snapshot/embedded-linux.html > >-- >For more options, visit http://beagleboard.org/discuss >--- >You received this message because you are subscribed to the Google Groups >"BeagleBoard" group. >To unsubscribe from this group and stop receiving emails from it, send an >email to [email protected]. >For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
