Look at your /etc/network/interfaces file, there is a line that say that you can specify the mac address.
Micka, Le Fri Dec 19 2014 at 12:23:27, Vernon Tindell <[email protected]> a écrit : > Has anyone successfully changed the MAC address on their BBB running > Debian? It seems all of my BBBs have the same MAC address. While this is > handy for predicting what IP address it will pull from DHCP, it makes it > tough to put more than one BBB on a layer 2 network. > > With the official image (5-14-2014), setting hwaddress in > /etc/network/interfaces will cause eth0 to fail. I installed > kernel 3.8.13-bone68 and now editing /etc/network/interfaces has no > effect. Eth0 initializes, but has the same MAC address as before. > > If I down the interface and issue #ip link set dev eth0 address > 78:a5:04:ca:4f:10 RTNETLINK answers: Operation not supported. > > Any guidance would be much appreciated! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
