Hot plug does not work for USB in kernels 3.8.x, but *should* with 3.14.x +
As for soft reset / powerup, it sounds as though you're not getting enough power to the device as the system is coming up. How are you powering the beaglebone, and if barrel jack what is the PSU rated for ? On Thu, Dec 25, 2014 at 3:25 AM, Rick Mann <[email protected]> wrote: > Running Debian 7/3.8.13-bone68, if I shut down the system with "shutdown > -h now", it nicely powers off, and powers off the USB bus. But if I then > press the power button to power things back up, it does not power up the > USB device that's attached. The dongle also doesn't work if it's plugged in > after boot. > > If instead I pull the power and re-apply it (with the dongle plugged in), > things get powered up normally and it works fine. > > Any ideas? Much appreciated! > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
