On Sat, Dec 27, 2014 at 8:25 PM, Mark Copper <[email protected]> wrote: > I updated the "m7601Usta" module following Robert Nelson's procedure in the > beagleboard "Jessie Snapshot content" thread of October 28. > > Module installation appears to be successful: > # lsmod | grep mt > mt7601Usta 757197 0 > > The adapter is plugged into hub (the Ralink) > # lsusb > Bus 001 Device 004: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter > Bus 001 Device 003: ID 148f:7601 Ralink Technology, Corp. > Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > But the device does not appear under "ifconfig -a" or "iw dev" or "ip a" > (just to be sure....) > > I'm running Debian Jessie on the BBB: > # uname -a > Linux beaglebone 3.14.26-ti-r43 #1 SMP PREEMPT Tue Dec 23 20:10:13 UTC 2014 > armv7l GNU/Linux > > Am I missing anything obvious?
Nope... We are still using mt's 3.0.0.4 20130913 code dump.. You should see ra0 after "sudo ifconfig -a".. But yeah, it's not working here either. I haven't found a later code dump.. https://github.com/rcn-ee/mt7601u/commits/master Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
