You can download a free viewer for Allegro and measure it. Gerald
On Sun, Dec 28, 2014 at 6:25 PM, <[email protected]> wrote: > > I'm designing a cape for my BBB which should mate with a 2x2 pin header > soldered into TP5/6/7/8, as well as the main connectors P8 and P9. In the > system reference manual, exact locations are given for P8 and P9 relative > to the standard cape board edges, but I need to know the location of the > battery TPs relative to some (any) other datum, e.g. the offset of TP5 > relative to P9 pin 2. I don't have commercial CAD or PCB layout software > to open the original design files. Could someone give me a measurement > (preferably obtained in software, not by attempted measurement of a > physical board)? > > Thanks, > > Mark > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
