I have an application that needs a XBee and another module to be turned on and off digitally via a BealgeboneBlack.
The Setup is 2 XBee's and an application board is connected to the BealgeboneBlack's UART and a GPIO for the power state . When the System is Powered ON I need 1 Xbee and the BealgeboneBlack to come on and do its routines. After the system gets a specific signal from the Xbee (wirelessly from a baseStation) the board has to turn on the other XBee and application board. And when the operation is over, the XBee and Board is to be powered back down. I dont want to put them in sleep or low power state, just power both those devices off. Was thinking of using a relay. But i cannot find a 3.3v 1A SMD Equivalent system. I am looking for a SMD type of footprint to go on a very compact board. What options do i have? The XBee needs around 1A Power and the Application board 500mA. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
