I've had SPI0 happily working. Then I had to switch to SPI1 (disable SPI0). Due to the issue in Debian Wheezy, custom capes need to be added, enabled by adding "CAPE=ADAFRUIT-SPI1" to /etc/default/capemgr
On bootup bone_capemgr.*/slots shows the correct SPI1 cape loaded and only SPI1, which is correct. I did disable the HDMI capes In my Python application I tried from Adafruit_BBIO.SPI import SPI spi = SPI(0,0) spi.mode=1 spi.msh=1000 spi.open(0,0) In this case, the application runs but it automatically loads ADAFRUIT-SPI0 cape... if I try spi = SPI(1,0), spi = SPI(1,1), spi = SPI(2,0) or spi = SPI(2,1) I get an error "no such file or directory" even though the /dev folder contains those files spidev1.0, spidev1,1 What is the proper way to get SPI1 working? What does spi.open(0,0) specify? Is that active high / low settings? Thank you, Boris. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
