The previously posted 3-line debug log is what results from holding the
boot button (S2 near the microSD slot, right?) down during power-up. No
LEDs except power.
> U-Boot SPL 2015.01-rc4-00002-g76c2d3b (Dec 30 2014 - 20:48:45)
> spl: mmc init failed: err - -19
> ### ERROR ### Please RESET the board ###
If I just power up with the SD card in place, but not holding the boot
button, the original 13 lines of debug plus "reading u-boot.img", no LED
action except power.
>
> Humm, this was an issue a day before that image.. What happens when
> you hold down the boot button, before you power the board. (you can
> let off of the boot button when all 4led's are lit)
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
