This is $55 board. If you need all those power taps that adds cost, buy an EVM from TI.
As to power savings in your application, which at this point is a mystery, run the processor slower, and lower the core voltage to save power. Gerald On Thu, Jan 22, 2015 at 9:39 AM, Satya <[email protected]> wrote: > > Hello All, > I would like to know if any one did power level calculation > for BBB, seems like it does not have enough current monitoring hookups as > like EVM, does any body have an software solutions regarding the same...!!! > > > I have a few questions regarding the power management in AM3358: > > 1) > *How to make user level Applications be power aware, may be my question > over ambitious, do i need to implement CONFIG_PM related prepare, > resume, suspend for all the drivers???* > > > 2) *What about the dynamic pin control > https://www.kernel.org/doc/Documentation/pinctrl.txt > <https://www.kernel.org/doc/Documentation/pinctrl.txt> ...!!! will it be > helpful if we keep some power hunger devices in high impedance at run-time. > I kinda seems confused and lost in this subject* > > > > 3)*Do i need to take any special care in the schematics, for power > saving, as i have still have a very little window left for hardware level > changes on my board*. > > > Thanks, > pratap > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
