Hi, first of all we were able to enable the CAN bus on the Arch Linux and now it seems that it's working. I will start building the cape to test it. If you are interested in using CAN in the Arch Linux, I can explain it to you! Second, my project is all about getting CAN data and sending it via Wifi and I need a range of something like 1 km cause I'm building a telemetry system for the FSAE electric competition. I had thought to use a router to send this data via TCP/IP since the SocketCAN abstracts the CAN data as it were just another TCP/IP socket. However, this consumes a lot of power and it could become a problem. Do you have any other ideas for this issue? Thanks in advance once again
2015-01-22 11:24 GMT-02:00 Marco Steger <[email protected]>: > Dear Pedro, > I will use my BBB to connect it to the OBD interface as well as with an > 802.15.4 WSN. So I will need a simple voltage conversion 12V vehicle > battery -> 5V BBB, the integration of an OBD controller ,and an interface > to my WSN. Nothing really complex but I won't be able to have it before the > 20 of February (because I'm on vacation for the next 3 weeks :) ) > > What are your plans? > > Best regards, > Marco > > 2015-01-22 12:56 GMT+01:00 Pedro Bueno de Castro < > [email protected]>: > >> I am using the mcp2551, the same used in shields fos RPI and Arduino, so >> it`s easier to find one. Which kind of extra functionalities are thinking >> of? >> >> Best Regards >> >> 2015-01-22 5:09 GMT-02:00 Marco Steger <[email protected]>: >> >> Hi Pedro, >>> sounds great. Congrats! >>> >>> It's the same for me ... there is no cape yet. I want to have some more >>> functionalities on the cape/PCB. So it will me take some time till I have >>> it and can test the CAN connection. But I will inform you about my results. >>> >>> Do you already know which transceiver you are going to use in your >>> project? >>> >>> Best regards, >>> Marco >>> >>> 2015-01-21 21:32 GMT+01:00 Pedro Bueno de Castro < >>> [email protected]>: >>> >>>> Hey Marco, >>>> I don`t see any problems for us to help each other, in fact that`s a >>>> great idea! >>>> I tried to set can using socketcan via ubuntu 14.04 booting from the sd >>>> card and it appeared to me that it worked, but I haven`t done my cape yet, >>>> only the schematics. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/beagleboard/qpsqzxCRT8s/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/qpsqzxCRT8s/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Pedro Corrêa Bueno de Castro >> Diretor de Telemetria, Baixa Tensão e Sensores >> Equipe Unicamp E-Racing >> +55 19 996068768 >> www.unicamperacing.com >> www.facebook.com/unicamperacing >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/qpsqzxCRT8s/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/qpsqzxCRT8s/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Pedro Corrêa Bueno de Castro Diretor de Telemetria, Baixa Tensão e Sensores Equipe Unicamp E-Racing +55 19 996068768 www.unicamperacing.com www.facebook.com/unicamperacing -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
