Sorry, forgot to mention in step 1, after power up of BBB when you put a microSD into your Beaglebone Black before creating a flasher image, you need to un mount your microSD card for the procedure to work properly. NOTE: when you power up, mmcblk0 is the device the unit boots from, so if you power up from eMMC, eMMC will be mmcblk0, your microSD when put in will become mmcblk1. If you boot from the microSD on power up, your microSD will be mmcblk0 and your eMMC will become mmcblk1 from my understanding. beaglebone # umount /dev/mmcblk1
On Friday, January 23, 2015 at 5:30:54 AM UTC-5, [email protected] wrote: > > hi, > > I am using bbb with debian distribution and i want to load angstrom > package. so i think to backup my debian image from eMMC and to reuse in > future. But i am unable to do that. I have followed the instructions from > http://elinux.org/BeagleBone_Black_Extracting_eMMC_contents > I formatted sd card (8GB) in FAT format and inserted it into powered off > bbb and holding the s2. i released s2 after few seconds but i can not > notice any changes in user0 led. what is the problem, i can't realize it. > can anyone help me? is it board's hardware problem? > > thanks in advance. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
