From: Sherman Boyd <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Thursday, February 5, 2015 at 11:14 AM To: "[email protected]" <[email protected]> Subject: [beagleboard] Beaglebone Black boot order
> I thought the boot order was: eMMC, uSD, UART0, USB. But it seems to boot > from uSD as long as one is present, S2 pressed or not. What's going on here? BBB uses MLO and u-boot from eMMC and then loads uEnv.txt file from the SDCard and then boots the kernel from the SDCard. If you press the boot button, then MLO and u-boot on the SDCard are used. Regards, John > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
