On Feb 10, 2015 8:03 AM, "Kazz" <[email protected]> wrote: > > Hi all > > Please help me. > I tried to use Ubuntu-14.04.1-console-armhf-2015-01-06 demo image on BeagleBoard-xM. > However boot stop on the way. > Boot messages are as follows. > What should I do ? > > > U-Boot SPL 2015.01-00011-g2efed9f (Jan 12 2015 - 17:15:10) > SPL: Please implement spl_start_uboot() for your board > SPL: Direct Linux boot not active! > reading u-boot.img > reading u-boot.img > > > U-Boot 2015.01-00011-g2efed9f (Jan 12 2015 - 17:15:10), Build: jenkins-github_Bootloader-Builder-90 > > OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > Beagle xM Rev C > No EEPROM on expansion board > No EEPROM on expansion board > Die ID #686800029ff80000015f26ad0f007010 > Net: usb_ether > Error: usb_ether address not set. > > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > Checking for: /uEnv.txt ... > Checking for: /boot/uEnv.txt ... > 160 bytes read in 44 ms (2.9 KiB/s) > Loaded environment from /boot/uEnv.txt > Checking if uname_r is set in /boot/uEnv.txt... > Running uname_boot ... > loading /boot/vmlinuz-3.18.1-armv7-x2 ... > 5069696 bytes read in 351 ms (13.8 MiB/s) > loading /boot/dtbs/3.18.1-armv7-x2/omap3-beagle-xm.dtb ... > 62562 bytes read in 113 ms (540 KiB/s) > loading /boot/initrd.img-3.18.1-armv7-x2 ... > 3984943 bytes read in 286 ms (13.3 MiB/s) > debug: [console=ttyO2,115200n8 root=UUID=76d3f557-1b80-4d5b-ad37-8986b0d7b425 ro rootfstype=ext4 rootwait fixrtc quiet] ... > debug: [bootz 0x82000000 0x88080000:3cce2f 0x88000000] ... > Kernel image @ 0x82000000 [ 0x000000 - 0x4d5b80 ] > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > Loading Ramdisk to 8fc33000, end 8ffffe2f ... OK > Using Device Tree in place at 88000000, end 88012461 > > Starting kernel ... > > [ 0.814941] omap_l3_smx omap_l3_smx.0: couldn't request debug irq > [ 0.848785] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi' > [ 2.880187] Error: Driver 'tfp410' is already registered, aborting... > [ 2.985260] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 > [ 3.084197] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva > [ 3.091796] omap2_set_init_voltage: unable to set vdd_mpu_iva > [ 3.098968] omap2_set_init_voltage: unable to find boot up OPP for vdd_core > [ 3.106323] omap2_set_init_voltage: unable to set vdd_core > [ 5.112609] mmc0: card never left busy state > [ 5.117095] mmc0: error -110 whilst initialising SD card
Your microsd card failed here.. Do you have another? The beagle/beagle xm are very 'picky' on later kernels.. > Gave up waiting for root device. Common problems: > - Boot args (cat /proc/cmdline) > - Check rootdelay= (did the system wait long enough?) > - Check root= (did the system wait for the right device?) > - Missing modules (cat /proc/modules; ls /dev) > ALERT! /dev/disk/by-uuid/76d3f557-1b80-4d5b-ad37-8986b0d7b425 does not exist. Dropping to a shell! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
