Getting closer. I have everything built and running bdt, produces a logcat message that there is no supported device. This is with two different adapters. I've posted some questions to the android-x86 list including which adapters are supported. I think I'm getting close.
Also I found that there is a android-bluez project that is a drop in replacement for bluedroid. I may try that next. https://01.org/bluez-android On Tuesday, February 10, 2015 at 3:29:53 PM UTC-7, Keith Conger wrote: > > That was it RFKILL needed to be built in also. Rebuilding. > > On Tue, Feb 10, 2015 at 2:06 PM, Andrew Henderson <[email protected]> > wrote: > >> Try configuring the kernel using the "menuconfig" target (like "make >> menuconfig" in the makefile). I suspect that you are manually setting >> something in the .config and there are other settings that conflict with >> it. Normally, these conflicts are managed via the Kconfig or menuconfig >> interface (i.e. it just takes options away from you or forces some items to >> be modules). Make sure that the options that you are setting are actually >> all compatible with each other. If all else fails, you can manually insmod >> modules in the init.{ro.hardware}.rc file inside of Android during boot. >> >> On Tuesday, February 10, 2015 at 3:41:52 PM UTC-5, Keith Conger wrote: >>> >>> It built without errors. I'm having trouble with the kernel though. I >>> made sure kernel/.config and am335x_evm_android_defconfig both had >>> CONFIG_BT=y. I re-ran make in the root of BBBAndroid. As soon as I >>> answered the questions about the USB gadget driver it reverted to >>> CONFIG_BT=m >>> along with the other options I modified. Any ideas Andrew? >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/X4HYHv9cC-0/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
