After I messed up uEnv.txt on eMMC I am trying to burn image in Micro SD and boot BBB this way but no luck.
These are the steps I did: I downloaded bone-debian-7.5-2014-05-14-2gb.img.xz. Extracted to bone-debian-7.5-2014-05-14-2gb.img >From Ubuntu Host machine executed: sudo dd if=bone-debian-7.5-2014-05-14-2gb.img of=/dev/sdc bs=1M After some time about 681 MB size image is written to Micro SD card. Now I am assuming this image has everything you need. kernel, filesystem and bootloader and I DO NOT have to manually make partitions (for kernel, fs and swap) on the SD card. Please verify. Then I plug in the Micro SD card to the BBB and attached my USB cord from Host to target while pressing on S2 boot button. I also tried using 5V power supply. All 4 LEDS flashed after a minute only fourth LED flashes interval of a second. LED next to 5V power supply is solid lit. May be BBB booted with Linux but I have no way of knowing. I can not see it through my COM port (before when booted with eMMC I could see the COM port and connect to BBB with terra term). I really wished BBB had serial port like most boards have. Another question is I do not want Linux kernel loaded from either eMMC or MicroSD card I want to setup NFS and tftpboot for that I want to prompt on uboot. How can I do that? Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
