Hello All, I am trying to download my compiled kernel to BBB using TFTP.... So far I have no luck with anything...
First thing is that I am unable to download anything via tftp: below is the snapshot: U-Boot# setenv ipaddr 192.168.0.100 U-Boot# setenv serverip 192.168.0.1 U-Boot# tftp 0x81000000 hemant.txt link up on port 0, speed 10, half duplex Using cpsw device TFTP from server 192.168.0.1; our IP address is 192.168.0.100 Filename 'hemant.txt'. Load address: 0x81000000 Loading: T T T T T T T T T T T T T T T T T T T T Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC d0:39:72:6b:eb:11 HOST MAC de:ad:be:af:00:00 RNDIS ready musb-hdrc: peripheral reset irq lost! high speed config #2: 2 mA, Ethernet Gadget, using RNDIS USB RNDIS network up! Using usb_ether device Secondly, I was expecting that when I give saveenv command to uboot, it will sabe ipaddt and serverip for next boot... But this doesnt seem to happen... Please tell me what am I missing here... Thanks for reading the message,.,, Regards, Hemant Kapoor -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
