Look at the topic "Cannot SSH into BBB (or access 192.168.7.2 web page)
from Linux". It was on this list about two weeks ago...
The guy used the command "dhclient eth2" to configure his eth2 IP in the
same range of BBB usb port...
Miguel Aveiro
On 25-02-2015 08:29, Gary McKinney wrote:
In Ubuntu check to see if there is an interface for the USB connection
to the BBB. (ifconfig) - if not you need to install the usbnet driver
to access the BBB through the usb port with IP connectivity. If you
do see the interface make sure it is set to 192.168.7.1/24 otherwise
it will not be on the right network to communicate with the BBB.
Hope this helps...
gm...
On Tuesday, February 24, 2015 at 12:55:40 PM UTC-5, Alex Fuhr wrote:
I just recently got a Beaglebone Black Rev C, and have tried for a
while to do the "Getting Started" guide in Ubuntu, and cannot seem
to get the network connection to work. I have tried running the
mkudevrule script and updating my kernel to 3.16, none of these
have worked.
To verify that it is not the Beaglebone's issue, I booted into
Windows, installed the drivers linked on the page, and was able to
easily get a web server. What might I be doing wrong in Ubuntu?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
