It's been a while since I was tinkering with this, but as I recall, the pin designations were as expected.
Is your SPI not working? On Fri, Mar 6, 2015 at 4:55 AM, <[email protected]> wrote: > I see the same problems. Guys, will it work though using the pins > described for spi0? > > 2015. február 22., vasárnap 5:18:34 UTC+1 időpontban Steve French a > következőt írta: > >> Matt, >> I agree!!! It is very confusing, especially when you are trying to >> figure out which pin to probe!! >> -frenchy >> >> On Thursday, January 23, 2014 at 12:18:57 PM UTC-5, Matt Graham wrote: >>> >>> >>> I think I posted to the wrong section of the group. Apologies for this >>> repost. >>> >>> Running the latest angstrom image, with update, upgrade. >>> Installing BB-SPIDEV0 seems to produce /dev/spidev1 which doesn't seem >>> right. >>> I was expecting /dev/spidev0 based on this http://elinux.org/ >>> BeagleBone_Black_Enable_SPIDEV#SPI0 >>> >>> Any ideas on this problem? >>> >>> root@beaglebone:~# find /dev -iname *spi* >>> root@beaglebone:~# cat /sys/devices/bone_capemgr.*/slots >>> 0: 54:PF--- >>> 1: 55:PF--- >>> 2: 56:PF--- >>> 3: 57:PF--- >>> 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G >>> 5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI >>> root@beaglebone:~# echo BB-SPIDEV0 > /sys/devices/bone_capemgr.*/slots >>> root@beaglebone:~# cat /sys/devices/bone_capemgr.*/slots >>> 0: 54:PF--- >>> 1: 55:PF--- >>> 2: 56:PF--- >>> 3: 57:PF--- >>> 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G >>> 5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI >>> 7: ff:P-O-L Override Board Name,00A0,Override Manuf,BB-SPIDEV0 >>> root@beaglebone:~# find /dev -iname *spi* >>> /dev/spidev1.0 >>> /dev/spidev1.1 >>> root@beaglebone:~# >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/4IeImY8I4-g/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
