Grab a copy of the Device Characteristics, SPRS717, for the AM335x.
Chapter 5 has the electrical parameters. You can chase pins from the ZCZ
ball
to the section of table 5.7 that looks at that pin. A short and
incorrect answer
is that logic 0 is less than .8VDC and a logic 1 is greater than 2VDC,
but that
varies with the function of the pin. You need to check each individually.
Chad
On 3/8/2015 7:18 AM, COG wrote:
Hi:
I would like to know (preferably from a datasheet or similar) the
*input voltage ranges* that would equate to a '*logic low*' and a
'*logic high*' for the BBB?
Here is an example of what I am talking about:
See the sub topic *Arduino Logic Levels* on the page titled 'Logic
Levels' (https://learn.sparkfun.com/tutorials/logic-levels).
Thanks
COG
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
had Baker 669 Landis St Memphis, TN 38104-5531
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
