Hi. Did you ever have any luck with this? I'm interested in working on a project with similar requirements.
Thanks! On Sunday, May 4, 2014 at 1:51:43 PM UTC-7, [email protected] wrote: > > Hi: > I want to use the beaglebone black with an ADC/DAC (pcm3168a) with TDM > format, so that i can have 6 audio inputs and mix them or record them > sepparatly. For this, unless im mistaken, i need to use a mcasp as an audio > board. The problem is how i build the drivers so mi linux recognises de > mcasp as an audio board. I am newbie to this, ive read lots of post but i > can´t figure where are the files i need to change, or what to do. I would > need to configure one serializer of the mcasp as an audio input in TDM > format with 6 channels, and one serializer as an audio output with 8 > channels (6 as direct outputs and the other 2 as the mixes). The output > will be connected trhough the mcasp back to de pcm3168a DAC's. I thought of > using ALSA/SoC drivers for recieving, (or pulseaudio, but i havent found > any information of interacting with pulseaudio with mcasp of the board). I > would appreciate if someone can indicate me where to find information about > building the necessary drivers, some tutorials or something. Obviously I > would share my codes and everything needed if someone is in the same > situation after i had succeeded with this. > Please, any help would be apreciated. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
