Got it! Steps 1 & 2 are not necessary. The rest is pretty straight-forward.
On Wednesday, March 11, 2015 at 2:27:30 PM UTC-6, acheesehead wrote: > > I want to read the BBB ADC inputs using the QNX operating system. As no > driver is provided in the QNX BSP, I need to write low-level C code to do > this. I figure I need to do the following steps: > > 1. Put the pins in the right mux mode > 2. Turn on the clock to the ADC > 3. Set up the 'steps' > 4. Start a conversion sequence > 5. Wait for the sequence to end > 6. Read the sampled values > > I have not found any low-level code that does this. It would be greatly > appreciated if anybody could provide example register-level code to do this. > > Thanks in advance! > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
