Has anyone found a set of instructions for setting up StarterWare in CCSv6 running on Windows that is confirmed to work for the BBB? I don't want to use the BBB with an OS. I really only want to get the libraries for the hardware abstraction layer if I can so that I can jump into C code.
I've found several sets of instructions in various places that all seem to be different, and none are building correctly. I seem to be missing function definitions. The header files are there, but I can't find where their definitions are anywhere. The best set of instructions I've found are here: http://anthonymerlino.us/uncategorized/getting-started-with-beaglebone-black-bbb-and-starterware However, I am still having problems getting anything to build. I have installed the Beaglebone Black patch AM335X - 02.00.01.01.patch1. I also notices that if when I create a target configuration CCS and select BeagleBone_Black it identifies the processor as an AM3359 and not an AM3358. All the documentation I have says it should be an AM3358 and I can see AM3358 printed on it. I have confirmed that CCS is working and was able to get the simple hello world program to run through JTAG on my first try. BTW, I found the following very good for getting the JTAG working: http://blog.parr.us/2014/11/14/beaglebone-black-debugging-via-ti-usb100v2-jtag-emulator/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
