Yes. Gerald
On Wed, Mar 18, 2015 at 3:16 PM, Jayakrishnan K V < [email protected]> wrote: > Thanks Gerald for the quick response. > > But I need to connect NAND flash like Micron MT29F8G08ABABAWP to the > Beagle bone black through the expansion connector and boot from it. > > So is it possible to program like that NAND flash connected to beagle bone > black through TI USB100v2 JTAG Emulator and Uniflash Standalone Flash Tool. > > Thanks, > Jayakrishnan K V > > On Thursday, 19 March 2015 01:11:47 UTC+5:30, Gerald wrote: >> >> External NAND is a eMMC device. Same as a microSD. You have to use >> thoseprotocols to program it. JTAG does not offer any additional >> capabilities in that respect. >> >> Gerald >> >> On Wed, Mar 18, 2015 at 2:38 PM, Jayakrishnan K V <[email protected]> >> wrote: >> >>> >>> Hi, >>> >>> I would like to experiment External NAND flash interface with BeagleBone >>> Black. >>> >>> And for that I need to finalize a programmer to flash the External NAND >>> flash connected to the beagle bone black. >>> >>> So is it possible to program External NAND Flash connecting to Beagle >>> Bone Black with TI USB100v2 JTAG Emulator and Uniflash Standalone Flash >>> Tool for TI Microcontrollers. >>> >>> I would like to confirm it before ordering the Emulator. >>> >>> Anybody have any practical idea about it, please let me know. >>> >>> Thanks in Advance, >>> >>> Jayakrishnan K V >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> http://circuitco.com/support/ >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
