Hi Guys, I want to use the UART2 Pins. What I have done so far: downlaoded the dtb-rebuilder 3.19 https://github.com/RobertCNelson/dtb-rebuilder/blob/3.19.x/src/arm/am335x-boneblack.dts
and outcommented those two lines /* #include "am335x-peripheral-ttyO2.dtsi" */ /* #include "am335x-bone-pinmux-ttyO2.dtsi" */ Than make, make install, reboot The pins have been muxed and are visible in /sys/kernel/debug/pinctrl/44e10800.pinmux/pinmux-pins When I have a look in /dev I can only see tty in the following structure: tty tty0 tty1 tty10 tty11 tty12 .. tty19 tty20 tty21 tty23 .. What is the correct UART2 Entry? I thought they are called tty00, tty01 ... But there is not even a tty00.... Thanks! Greetings Benjamin -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
