Problem solved. I have been using a wrong image.
On Fri, Apr 17, 2015 at 11:51 AM, Petro <[email protected]> wrote: > > Hi everybody. > I have got a BBB board with Angstrom Linux on it. Yesterday I have tried to > update it to a new recommended Debian image. > After enabling flasher in mSD card I booted my BBB from it. On the beginning > user LEDs were blinking in a wave pattern, one ofter another. After some > 15 minutes all 4 LEDS started to blink simultaneously. On 60th minute the > pattern was two short blinks, pause, repeat. Tired of waiting I powered it > OFF. Now it refuses to boot from the on board image (probably got > corrupted.). I get some stable cycle of LED flashes, and cannot connect to > the BBB via SSH. > > In this case power was provided by USB. > I tried to repeat flashing while powering BBB from a 5V PSU. The same > result. > > Any hint? > Thanks > Petro > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/UrLXjdGExBU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. -- ______________________________ Petro -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
